Msaada wa kiufundi

Msaada wa kiufundi

Nyenzo

Mill
Kabla ya mabati
ya chuma cha pua SS304
cha pua SS316
Aluminium
FRP / GRP


Maliza

G: Kabla ya mabati / PG / GI - kwa ajili ya matumizi ya ndani kwa AS1397
H: moto kuzamisha / HDG - kwa ajili ya matumizi ya nje ya BS EN ISO 1461
S4: pua SS304
S6: pua SS316
P: Poda coated - kwa ajili ya matumizi ya ndani kwa JG / T3045
A: Aluminium na AS / NZS1866
FRP / GRP: Fiberglass Kraftigare plastiki
F: Moto Rated kwa AS3013: 2005
Z: Zinc plated - kwa ajili ya matumizi ya ndani kwa BS EN 12329
E: Electrolytic Polishing - kwa ajili ya chuma cha pua kutumia
M: Mill / kali / Plain chuma wa ISO 4995

 

 

Kiwango cha chini Coating Unene na Misa ya Sampuli ambazo centrifuged (HDG)
Ibara na ni T hickness Mitaa Coating Unene (Mi nimum)

m

Mitaa Coating Misa (Kiwango cha chini)

g / m 2

Maana Coating Unene (Kiwango cha chini)

m

Maana Coating Misa (Kiwango cha chini)

g / m 2

chuma> 6 mm 70 505 85 610
chuma> 3 mm kwa 6 mm 55 395 70 505
chuma1.5 mm na mm 3 45 325 55 395
chuma< 1.5 mm 35 250 45 325

 

 

Ukaguzi wa

Dimension ukaguzi
Coating Unene ukaguzi


Cable Tray Inapakia Habari

Mzigo mtihani kwa mujibu EN 61537: 2007
Q = UDL (enhetligt kusambazwa mzigo)
Usalama Factor = 1.7
L = kati span
F = deflection = 1/100 ya span kati (max.)
S = ganga eneo
Alisema loadings yanahusu bidhaa chuma laini tu .
Besca ya mzigo kupima ni kwa mujibu wa EN 61537: 2001. Katika hali halisi hii inashughulikia kuendelea / multi
span mitambo, sawasawa kubeba pamoja urefu wa, na katika upana kamili wa tray. Spans mwisho
these installations should be reduced to 0.75 of the intermediate spans.
DEFLECTION: Besca’s load and deflection figures are in accordance with EN 61537:2007, with the characteristic
deflection of Unistrut Cable Tray limited to span/100 and load figures inclusive of a safety factor of 1.7.
ACCESSORIES: To ensure adequate support, accessories should be supported locally.
COUPLERS: The loading and deflection tables for Unistrut Cable Tray assume that the couplers are located at the
most onerous position within the span (i.e. mid span). To maintain the load/deflection figures stated in the tables,
the couplers should not be located in end spans or over support locations. Straight couplers were utilized for the
testing of the medium and heavy duty cable trays. Only one pair of couplers should be used per span.

Upana (mm) Muhimu Cross Section (cm 2)
Mwanga Duty Duty Medium Wajibu mzito
50 5.4 11.4 -
75 8.1 17.4 35.8
100 10.9 23.5 48.1
150 16.6 35.6 72.7
225 24.9 53.7 108.2
300 49.9 70.4 144.8
450 75.1 106.1 213.6
600 95.3 141.8 285.6
750 119.3 171.1 357.6
900 143.3 205.6 429.6