Sipo teknik

Sipo teknik

Materyèl

Mill
Pre-galvanize
Nerjaveèi asye SS304
Nerjaveèi asye SS316
Aliminyòm
FRP / Polyester


Fini

G: Pre-galvanize / PG / GI - pou itilize andedan kay la AS1397
H: cho Immersion galvanize / HDG - pou itilize deyò ak BS EN ISO 1461
S4: Nerjaveèi asye SS304
S6: Nerjaveèi asye SS316
P: Powder kouvwi - pou itilize andedan kay la JG / T3045
A: aliminyòm yo kòm / NZS1866
FRP / Polyester: Fiberglass Cranford Plastik
F: Ponpye Rated AS3013: 2005
Z: Zenk plake - pou itilize andedan kay la ak BS EN 12329
E: elèktrolitik Polissage - pou Nerjaveèi asye itilize
M: Mill / Ti / Plain Steel ak ISO 4995

 

 

Minimòm Plak Blanch Pesè ak Mass sou Samples ki pa santrifuje (HDG)
Atik ak li nan T hickness Lokal Plak Blanch Pesè (Mi nimum)

μm

Lokal rvetman Mass (minimòm)

g / m 2

Vle di Plak Blanch Pesè (minimòm)

μm

Vle di rvetman Mass (minimòm)

g / m 2

asye> 6 mm 70 505 85 610
asye> 3 mm a 6 mm 55 395 70 505
asye1.5 mm a 3 mm 45 325 55 395
asye< 1.5 mm 35 250 45 325

 

 

enspeksyon

Dimansyon Enspeksyon
Plak Blanch Pesè Enspeksyon


Kab Bac Loading Enfòmasyon

Tès chaj selon EN 61537: 2007
K = UDL (egzakteman menm jan distribye chaj)
Sekirite Faktè = 1.7
L = entèmedyè span
F = déplacement = 1/100 nan span nan entèmedyè (max.)
S = konvole kote
Deklare charjeman aplike nan pwodwi asye modere sèlman .
Tès chay Besca a se nan akò avèk EN 61537: 2001. An tèm pratik sa a kouvri kontinyèl / milti
enstalasyon span, respire chaje ansanm longè a nan, ak toupatou nan lajè a plen nan plato a. Chvoch yo fen nan
these installations should be reduced to 0.75 of the intermediate spans.
DEFLECTION: Besca’s load and deflection figures are in accordance with EN 61537:2007, with the characteristic
deflection of Unistrut Cable Tray limited to span/100 and load figures inclusive of a safety factor of 1.7.
ACCESSORIES: To ensure adequate support, accessories should be supported locally.
COUPLERS: The loading and deflection tables for Unistrut Cable Tray assume that the couplers are located at the
most onerous position within the span (i.e. mid span). To maintain the load/deflection figures stated in the tables,
the couplers should not be located in end spans or over support locations. Straight couplers were utilized for the
testing of the medium and heavy duty cable trays. Only one pair of couplers should be used per span.

Lajè (mm) Itil Lakwa Seksyon (cm 2)
limyè devwa mwayen devwa Lou devwa
50 5.4 11.4 -
75 8.1 17.4 35,8
100 10.9 23.5 48.1
150 16.6 35.6 72.7
225 24,9 53.7 108.2
300 49.9 70.4 144,8
450 75.1 106.1 213.6
600 95.3 141,8 285,6
750 119.3 171,1 357,6
900 143.3 205.6 429,6