Tekninen tuki
Tekninen tuki
materiaali
Mill
Pre-Sinkitty
Ruostumaton teräs SS304
Ruostumaton teräs SS316
Alumiini
FRP / GRP
Suorittaa loppuun
G: Pre-sinkitty / PG / GI - sisäkäyttöön on AS1397
H: kuumasinkitys / HDG - ulkokäyttöön BS EN ISO 1461
S4: Ruostumaton teräs SS304
S6: Ruostumaton teräs SS316
P: pulverimaalattu - sisäkäyttöön kohteeseen RR / T3045
V: Aluminium AS / NZS1866
FRP / GRP: Lasikuituvahvisteinen Plastics
F: palo on AS3013: 2005
Z: sinkitty - sisäkäyttöön BS EN 12329
E: sähkökiillotus - ruostumattoman teräksen käyttö
M: Mill / lievä / Plain Steel ISO 4995
Päällysteen minimipaksuus ja Mass Näytteet, jotka eivät ole sentrifugoitiin (HDG) | ||||
Artikkeli ja se on T pikkuisuus | Paikallinen Pinnoitteen paksuus (Mi nimum)
um |
Paikallinen Pinnoite Massa (minimi)
g / m 2 |
Tarkoittaa Pinnoitteen paksuus (minimi)
um |
Tarkoittaa Pinnoite Massa (minimi)
g / m 2 |
Teräs> 6 mm | 70 | 505 | 85 | 610 |
Teräs> 3 mm ≤ 6 mm | 55 | 395 | 70 | 505 |
Teräs≥ 1,5 mm ≤ 3 mm | 45 | 325 | 55 | 395 |
Teräs< 1,5 mm | 35 | 250 | 45 | 325 |
tarkastus
Ulottuvuus Tarkastus
Pinnoitteen paksuus Tarkastus
Johtokouru Lastaustietoa
Kuormituksen testi standardin EN 61537: 2007
Q = UDL (tasaisesti jakautunut kuorma)
Safety Factor = 1,7
L = väli- span
F = taipuma = 1/100 välituotteen span (max.)
S = liitoksen sijainti
Toisin kuormitukset sovelletaan teräs tuote vain .
Besca n kuormitus- on standardin EN 61537: 2001. Käytännössä tämä kattaa jatkuva / multi
span laitteistot, kuormittuu tasaisesti koko pituudelta, ja koko leveydelle lokeron. Sivujänteet on
these installations should be reduced to 0.75 of the intermediate spans.
DEFLECTION: Besca’s load and deflection figures are in accordance with EN 61537:2007, with the characteristic
deflection of Unistrut Cable Tray limited to span/100 and load figures inclusive of a safety factor of 1.7.
ACCESSORIES: To ensure adequate support, accessories should be supported locally.
COUPLERS: The loading and deflection tables for Unistrut Cable Tray assume that the couplers are located at the
most onerous position within the span (i.e. mid span). To maintain the load/deflection figures stated in the tables,
the couplers should not be located in end spans or over support locations. Straight couplers were utilized for the
testing of the medium and heavy duty cable trays. Only one pair of couplers should be used per span.
Leveys (mm) | Hyödyllisiä poikkileikkaus (cm 2) | ||
Kevyet | keskiraskaaseen | Heavy Duty | |
50 | 5,4 | 11,4 | - |
75 | 8.1 | 17.4 | 35.8 |
100 | 10,9 | 23.5 | 48,1 |
150 | 16,6 | 35.6 | 72,7 |
225 | 24.9 | 53,7 | 108,2 |
300 | 49.9 | 70.4 | 144,8 |
450 | 75,1 | 106,1 | 213,6 |
600 | 95,3 | 141,8 | 285,6 |
750 | 119,3 | 171,1 | 357,6 |
900 | 143,3 | 205,6 | 429,6 |